Description
Wedge wire screen Oman projects use these Guanle elements where a plain mesh would tear or clog. A wedge wire screen is built from V-shaped profile wire wound and welded onto support rods. The result is a rigid stainless steel cylinder or basket with precise, continuous slots that widen inward, so particles either pass straight through or stay on the outer face where they are easy to wash off.
The range is manufactured by Hebei Guanle Metal Wire Mesh Products Co., Ltd. (Guanle Filtering Technology), founded in 2010 in Anping County, Hebei, a town known as the home of China’s wire mesh industry. Guanle designs, produces and customises stainless steel wire mesh, precision filter screens and filter elements. The factory has more than 100 employees and over 50 automated machines, including laser cutting, precision welding and edge-wrapping stamping equipment. The company holds ISO 9001, TUV and FDA certifications and supplies the chemical, petroleum, water treatment, food, pharmaceutical and dust-control industries.
How It Works
Water flows from the outside of the screen to the inside, or the reverse in some strainer designs. The flat face of the wedge wire meets the dirty water first. Because each slot opens wider behind the face, a particle that enters the slot does not jam inside it. This is why wedge wire screens backwash well and resist blinding. The welded construction also takes high pressure differences without collapsing.
Key Features of This Wedge Wire Screen Oman Range
- Welded V-profile wire on support rods for high strength
- Non-clogging slot shape that backwashes cleanly
- 304 or 316 stainless steel construction
- Supplied as cylinders, baskets, flanged elements or flat panels
- Slot size, diameter, length and end fittings made to order
- Long service life with no media or fabric to replace
Materials and Mesh Options
Guanle builds every element to order. The table below lists the mesh materials and mesh-count ranges published in the Guanle catalogue. Final size, connection and rating are confirmed against your drawing or the old element.
| Material | Available mesh range |
|---|---|
| Stainless steel 201 / 304 / 316 | 2 – 3200 mesh |
| Duplex stainless SS 2205 / 2507 | 10 – 1800 mesh |
| Monel | 10 – 1400 mesh |
| Hastelloy | 4 – 400 mesh |
| Titanium TA1 / TA2 | 10 – 600 mesh |
| Brass / copper / phosphor bronze | 2 – 800 mesh |
| Diamond (expanded) mesh | Aperture 0.2 – 6 mm |
Applications in Oman
- Self-cleaning and automatic backwash strainers
- Underdrain and collector nozzles in sand, multimedia and carbon filters
- Water well intake screens on farms and camps
- Pre-screens before UF and RO plants on well or tanker water
- Cooling tower side-stream filters
- Industrial process and wastewater screening
Choosing the Right Model
The slot size is the main choice. It must be smaller than the filter media or particle you want to hold back, but as large as possible to keep pressure loss low. Brackish wells in Al Batinah and Al Sharqiyah carry fine sand and high chlorides, so we normally recommend 316 stainless steel and a slot matched to a sieve test of the sand. Wikipedia has a short background article on water wells and screens.
Why Water Treatment Matters in Oman
Most water used in Oman comes from desalination plants, tankers or wells. Well and tanker water often carries sand, silt and scale, and desalinated water picks up rust and debris in long pipelines and storage tanks. Every pump, valve, membrane and heat exchanger downstream is exposed to that dirt. A correctly sized metal screen at the right point is one of the cheapest ways to protect the rest of the system and cut breakdown calls.
Installation and Maintenance
Handle wedge wire elements by their end rings, not by the wires. Check that gaskets and O-rings seat evenly so water cannot bypass the screen. Most screens are cleaned by backwashing; heavy scale can be removed with a mild acid soak followed by a fresh water rinse. Inspect the welds and slots during each service visit.
Why Buy a Wedge Wire Screen from UV Water Systems
UV Water Systems (Uniqueness View LLC) is an ISO 9001:2015 certified water treatment company in Muscat with more than 14 years of field work in Oman. We size the element against your flow, pressure and water analysis, supply it, and our technicians install and service it. We also build the complete systems around these parts, from sand filters and softeners to RO plants. Browse more items in our strainers and filter elements range or contact our team for a quotation.
Frequently Asked Questions
What slot size do I need?
Share the media size of your filter or a sand sample from your well and we will select the slot. Call or WhatsApp +968 9763 7786 for pricing.
Can you replace the screen in my existing strainer or filter vessel?
Yes. Send the old element dimensions, end connection and a photo, and we will have a matching wedge wire element made. Call or WhatsApp +968 9763 7786 for pricing.
Is wedge wire better than mesh?
For high flow, high pressure or sandy water it usually lasts longer and backwashes better. For very fine filtration a mesh or sintered element may suit better. Call or WhatsApp +968 9763 7786 for pricing.
Reviews
There are no reviews yet.