Aquapro UV Ballast Oman – 14W & 40W Replacement Ballast for UV Sterilizers

Price range: ر.ع.18.000 through ر.ع.50.000

Genuine Aquapro UV ballast Oman stock: 14W, 40W, 40W with indicator connection and 40W with lamp timer. 220V 50/60 Hz. Matched to Aquapro UV-1 to UV-60 GPM sterilizers. Supplied and fitted in Muscat.

Description

The Aquapro UV ballast Oman customers order from UV Water Systems is the genuine replacement power supply for Aquapro ultraviolet water sterilizers. The ballast drives the UV-C lamp at the correct current. When it fails, the lamp goes dark and the water passing through the reactor is no longer disinfected, even though the system looks normal from outside. We keep four Aquapro ballast models in stock in Muscat.

Aquapro UV ballast Oman models

Each ballast is matched to a lamp wattage. Fitting the wrong one shortens lamp life or stops the lamp from striking. Check the model on your existing unit or send us a photo of the label on WhatsApp.

Model Lamp power Suits Features
BA-1014W 10W to 14W Aquapro UV-1 GPM Compact, for under-sink and dispenser UV
BA-2040W 20W to 40W Aquapro UV-6 GPM to UV-24 GPM Standard ballast for villa and light commercial units
BA-2040W-60 40W Aquapro UV-36 GPM to UV-60 GPM Indicator connection for a remote lamp-fail light
BA-2040W-T 40W 40W Aquapro UV systems Built-in timer that counts lamp hours and alerts for replacement

All models run on 220V, 50/60 Hz, which suits standard Oman mains supply.

Signs your Aquapro UV ballast needs replacing

A new lamp that does not light is the most common sign of a failed ballast. Other symptoms we see on site visits in Muscat:

  • The lamp flickers or takes several attempts to start
  • The ballast alarm beeps even after a new lamp is fitted
  • The ballast case is very hot or shows burn marks
  • The indicator LED is off while the power socket is live
  • Lamps fail early, well before 12 months

Why ballasts fail in Oman

Summer heat is the main cause. Many UV units are installed on roofs, in pump rooms or in outdoor cabinets where temperatures pass 50°C. Power surges after outages and water leaks from a cracked quartz sleeve also damage the electronics. Mount the new ballast in shade, off the floor, and on a socket with surge protection.

Aquapro UV ballast Oman with timer

The BA-2040W-T model counts lamp running hours. When the lamp reaches its service life it gives an alert, so you do not keep running a lamp that glows blue but no longer gives an effective UV-C dose. For restaurants, clinics and buildings where several people share responsibility for the water system, the timer version saves arguments about when the lamp was last changed.

Indicator connection model

The BA-2040W-60 has a connection for an external indicator or UV monitor. On larger systems in plant rooms you can see lamp status without opening the cabinet. Pair it with the Aquapro UV monitor for a reading of actual UV intensity.

Installation and compatibility

Our technicians fit the ballast, check the lamp connector and test the lamp before leaving. If the old ballast failed because of a water leak, we also check the quartz sleeve and O-rings. An Aquapro UV ballast Oman replacement visit usually takes under 30 minutes.

The ballast is designed for Aquapro lamps. For other brands such as Viqua, Trojan or Luminor, use that brand’s ballast. You can read more about how UV disinfection fits into safe drinking water in the WHO Guidelines for Drinking-water Quality.

Related parts in stock: Aquapro UV lamps, quartz sleeves and complete Aquapro UV sterilizer systems.

Aquapro UV ballast Oman FAQ

How do I know which ballast my UV system uses?

Read the model on the ballast label or the flow rating on the steel reactor. UV-1 GPM uses the 14W ballast. UV-6 to UV-24 GPM use the 40W BA-2040W. UV-36 and above use the 40W indicator model.

Should I change the lamp when I change the ballast?

If the lamp is older than 12 months, yes. A failing ballast can also damage the lamp electrodes, so we test the lamp after fitting the new Aquapro UV ballast Oman unit.

Do you deliver outside Muscat?

Yes. We deliver across Oman. Installation outside Muscat is arranged with the order.

How do I order?

Select the model, add to cart, or call or WhatsApp +968 9763 7786. Email sales@uvwater.biz with your UV model for a quick check before you order.

UV Water Systems (Uniqueness View LLC) is an ISO 9001:2015 certified water treatment company in Muscat with 14+ years of experience supplying UV, RO and filtration systems and spare parts across Oman.

Additional information

Model

14W (BA-1014W), 40W (BA-2040W), 40W Indicator (BA-2040W-60), 40W Timer (BA-2040W-T)

Reviews

There are no reviews yet.

Be the first to review “Aquapro UV Ballast Oman – 14W & 40W Replacement Ballast for UV Sterilizers”

Your email address will not be published. Required fields are marked *