Description
DM water 1000 liter IBC from UV Water Systems is demineralized water produced at our own treatment line in Muscat and filled into a clean 1,000-litre IBC tank. It is the practical pack size for factories, workshops, power and solar sites, laboratories and fleet operators in Oman who use more than a few jerry cans a week but do not need a full tanker. The price is shown openly: 130 OMR per 1,000-litre IBC.
Oman’s mains and well water carries 150 to 2,000+ ppm of dissolved salts. Put that water into a boiler, a battery, a radiator or a lab instrument and the salts stay behind as scale, sludge and white spotting. DM water removes those ions, so the equipment runs on water that leaves nothing behind.
Contents
- DM water 1000 liter IBC specifications
- Where our DM water 1000 liter IBC is used
- How we produce and test each batch
- DM water vs distilled vs RO water
- IBC handling and storage
- FAQ
- بالعربية
DM Water 1000 Liter IBC Specifications

| Parameter | Value |
|---|---|
| Product | Demineralized (DM) water, also called deionized water |
| Volume | 1,000 litres (264 US gallons) |
| Conductivity at 25°C | ≤ 5 µS/cm standard grade; higher-purity grades on request |
| Total dissolved solids | ≤ 3 ppm |
| Total hardness (as CaCO₃) | < 1 mg/L |
| pH | 5.5 – 7.5 (DM water absorbs CO₂ from air, so pH drifts slightly acidic) |
| Process | Pre-filtration, reverse osmosis and ion exchange polishing |
| Container | HDPE inner bottle, galvanised steel cage, pallet base |
| Outlet / inlet | Bottom discharge valve, top screw-cap filling opening |
| Approx. dimensions | 1,200 × 1,000 × 1,160 mm (L × W × H) |
| Approx. filled weight | 1,050 – 1,070 kg — forklift or pallet jack required |
| Test report | Batch conductivity / TDS test report on request |
| Price | 130 OMR per 1,000-litre IBC |
For reference, the conductivity limit of ≤ 5 µS/cm matches the Type IV reagent water class in ASTM D1193 Standard Specification for Reagent Water. If your process needs a tighter number, tell us the limit and we will confirm before filling.
Where Our DM Water 1000 Liter IBC Is Used
- Boiler feed and make-up water — removes the hardness and silica that form scale on tubes. See our guide on boiler feed water treatment in Oman.
- Forklift and lead-acid battery topping-up — tap water adds chlorides and iron that shorten battery life.
- Solar panel cleaning — a low-mineral final rinse leaves no white spots on PV glass. Read more on solar panel cleaning water in Oman.
- Engine and generator cooling systems — mixing coolant concentrate with DM water prevents scale in radiators and jackets.
- Laboratories and QC rooms — glassware rinsing, autoclaves, humidifiers and general bench work.
- Cosmetics, perfume and chemical blending — a consistent, mineral-free base for formulations.
- Car care, steam irons, laser cutters and industrial humidifiers — anywhere scale blocks nozzles or heaters.
Not for drinking. DM water is an industrial product. It is not sold as drinking water or for medical or pharmaceutical use.
How We Produce and Test Each Batch
- Pre-treatment: sediment and carbon filtration remove particles and chlorine.
- Reverse osmosis: removes roughly 95–98% of dissolved salts.
- Ion exchange polishing: mixed-bed resin takes out the remaining ions.
- Inline check: conductivity is read before filling; water outside the limit is not filled.
- Filling and sealing: the IBC is filled through the top opening and capped.
UV Water Systems is ISO 9001:2015 certified and has designed and serviced DM plants in Oman for over 14 years. If your monthly use keeps rising, we can also size an on-site DM water plant so you produce your own.
DM Water vs Distilled vs RO Water
| Type | How it is made | Typical conductivity | Best for |
|---|---|---|---|
| RO water | Membrane filtration | 10 – 50 µS/cm | Drinking, coffee, general washing |
| DM / deionized water | RO + ion exchange | ≤ 5 µS/cm | Boilers, batteries, labs, solar, cooling |
| Distilled water | Boiling and condensing | 1 – 5 µS/cm | Small lab and medical uses, small volumes |
For most industrial uses in Oman, DM water gives the same result as distilled water at a lower cost per litre. Need smaller packs? See our demineralised water in cans.
IBC Handling and Storage
- Keep the IBC on level ground, out of direct sun. UV light ages HDPE and warms the water.
- Keep the top cap closed between uses. Open containers pick up dust and CO₂.
- Use clean hoses and fittings. A dirty hose undoes the water quality in seconds.
- Stored sealed and shaded, DM water stays within specification for months. Opened tanks are best used within a few weeks.
- Do not store DM water in mild steel or copper. It is aggressive to bare metals; HDPE, PVC and stainless steel are suitable.
FAQ — DM Water 1000 Liter IBC
What does the 130 OMR price cover?
1,000 litres of DM water supplied in an IBC tank. Delivery within Muscat is arranged on order; ask us for other governorates.
Can I refill my own IBC?
Yes. Bring or return a clean IBC and ask for the refill price.
Do you supply larger volumes?
Yes, by tanker for monthly or project demand, priced per litre on quotation.
Can I get a test report?
Yes. We issue a conductivity and TDS test report for the batch on request.
Is DM water the same as distilled water?
Both are low in minerals. DM water uses RO and ion exchange; distilled uses evaporation. For batteries, boilers and cooling systems either works.
Buying guide: DM water in Oman – 7 costly mistakes to avoid | دليل المياه منزوعة المعادن في عمان
Order DM Water 1000 Liter IBC in Muscat
Call or WhatsApp +968 9763 7786 or email sales@uvwater.biz with your quantity and delivery location. Monthly supply contracts are available for factories, hotels, hospitals and contractors.
مياه منزوعة المعادن DM – عبوة IBC سعة 1000 لتر
توفر UV Water Systems مياه منزوعة المعادن (DM) في خزانات IBC سعة 1,000 لتر، منتجة في خط المعالجة الخاص بنا في مسقط. السعر: 130 ريال عماني لكل عبوة 1,000 لتر.
تحتوي مياه الآبار والشبكة في عمان على أملاح ذائبة عالية تترك ترسبات في الغلايات والبطاريات والمشعات وأجهزة المختبرات. المياه منزوعة المعادن تزيل هذه الأيونات فتعمل المعدات دون ترسبات.
- الموصلية عند 25°م: ≤ 5 µS/cm للدرجة القياسية، ويمكن توفير درجات أعلى نقاوة عند الطلب
- المواد الصلبة الذائبة TDS: ≤ 3 ppm
- العسر الكلي: أقل من 1 ملغ/لتر
- طريقة الإنتاج: ترشيح أولي، تناضح عكسي RO، ثم تبادل أيوني
- العبوة: خزان HDPE داخل قفص فولاذي مجلفن على منصة، مع صمام تفريغ سفلي
الاستخدامات: مياه تغذية الغلايات، تعبئة بطاريات الرافعات الشوكية، تنظيف الألواح الشمسية، أنظمة تبريد المولدات والمحركات، المختبرات، ومصانع العطور ومستحضرات التجميل.
هذه المياه للاستخدام الصناعي وليست مياه شرب. للطلب اتصل أو راسلنا عبر واتساب على +968 9763 7786.
Reviews
There are no reviews yet.